atmIfVptPnniSigAddressConversion - atm If Vpt Pnni Sig Address Conversion

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

atmIfVptPnniSigAddressConversion

atm If Vpt Pnni Sig Address Conversion

This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.

Back to Nortel-Magellan-Passport-AtmPnniMIB MIB page.

IPHost Network monitor allows you to monitor atmIfVptPnniSigAddressConversion on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel modems right now.

Easy monitoring of atmIfVptPnniSigAddressConversion with IPHost tools

MIBs list