With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.
aRtgPnniRfTransferCapabilityBbc
a Rtg Pnni Rf Transfer Capability Bbc
This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters are mapped into this parameter as follows: 0 : NoIndication, NoIndication 1 : NoIndication, yes 2 : NoIndication, no 5 : CBR, yes 8 : VBR, NoIndication 9 : VBR, yes 10: VBR, no NotApplicable specifies that the user does not want to specify the transfer capability. The CBR traffic type refers to traffic offered on services such as a constant bit rate video service or a circuit emulation. The VBR traffic type refers to traffic offered on services such as packetized audio and video, or data. The value NoIndication for traffic type is used if the user has not set the traffic type; this is also the case for end-to-end timing. The value yes for end-to-end timing indicates that end-to-end timing is required. The value no for end-to-end timing indicates that end-to-end timing is not required. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both.
Back to Nortel-Magellan-Passport-AtmNetworkingMIB MIB page.
IPHost Network monitor allows you to monitor aRtgPnniRfTransferCapabilityBbc on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel secure routers right now.
