lpEngArcCqcOvCdvReduction - lp Eng Arc Cqc Ov Cdv Reduction

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

lpEngArcCqcOvCdvReduction

lp Eng Arc Cqc Ov Cdv Reduction

This attribute specifies the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic. When the value of this attribute is set to disabled, the CDV value can be determined by the following equation: CDV <= 2/ASR + 1/LS where ASR is the Actual Shaping Rate of the connection and LS is the Link Speed of the interface. When the value of this attribute is set to enabled, the CDV relationship changes to the following equation: CDV <= 1/ASR + 1/LS As can be noted from the equations above, setting this attribute to enabled can reduce the CDV significantly. CDV reduction may be used to conform to policers which have strict Cell Delay Variance Tolerance (CDVT). However using this function reduces the transmit bandwidth utilization of the following cards: 3pDS3Atm, 3pOC3Atm, 2pJ6MAtm. When the value is cardDependent, CDV reduction is disabled for cardtypes 3pDS3Atm, 3pOC3Atm, 2pJ6MAtm, 4pDS1Aal1, 4pE1Aal1 and enabled for all other cards.

Back to Nortel-Magellan-Passport-AtmBaseMIB MIB page.

IPHost Network monitor allows you to monitor lpEngArcCqcOvCdvReduction on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel switches right now.

Easy monitoring of lpEngArcCqcOvCdvReduction with IPHost tools

MIBs list