lpArcRxFrameMemoryAllocation - lp Arc Rx Frame Memory Allocation

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

lpArcRxFrameMemoryAllocation

lp Arc Rx Frame Memory Allocation

This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting this value from 100. This attribute specifies the percentage of the receive CQM memory which should be allocated to the receive frame free list on the ATM- FP. The remaining receive CQM memory is allocated to the receive cell free list. Frame memory is used for trunks, ATM VCC testing and for inter-card communication. There is an absolute minimum quantity of frame buffers which is required by ATM software on the FP. If the value of this attribute is smaller than the absolute minimum, the ATM software will allocate the minimum required, rather than the actual number requested. The actual percentage of the receive CQM memory allocated to the receive frame free list is indicated by the Aru rxFrameMemoryAllocation attribute. A difference between the provisioned and the operational values may exist due to the requirement for a minimum number of frame buffers or rounding during computation within the FP

Back to Nortel-Magellan-Passport-AtmBaseMIB MIB page.

IPHost Network monitor allows you to monitor lpArcRxFrameMemoryAllocation on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel multiplexers right now.

Easy monitoring of lpArcRxFrameMemoryAllocation with IPHost tools

MIBs list