agentSnmpBroadcastStormTrapFlag ( agent Snmp Broadcast Storm Trap Flag ) from NETGEAR-SWITCHING-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a NETGEAR device in your network.

agentSnmpBroadcastStormTrapFlag

agent Snmp Broadcast Storm Trap Flag
1.3.6.1.4.1.4526.10.1.2.5.7.5

Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery. ::= { agentSnmpTrapFlagsConfigGroup 5 } --************************************************************************************** -- agentSpanningTreePortTable -- --************************************************************************************** agentSpanningTreeConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 7 } SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION The switch's Spanning Tree Switch Status

Back to NETGEAR-SWITCHING-MIB MIB page.

IPHost Network monitor allows you to monitor agentSnmpBroadcastStormTrapFlag on NETGEAR device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring NETGEAR access points right now.

Easy monitoring of agentSnmpBroadcastStormTrapFlag with IPHost tools

MIBs list