Juniper Ex Analyzer Input Type
This specifies whether interfaces or VLANs is mirrored. Mirroring can be done on the basis of the interface name.All packets received on a port configured for ingress mirroring is sent to the analyzer port.All packets sent out on a port configured for egress mirroring is sent to the analyzer port.Any number of network ports can be configured for ingress or egress mirroring.The value one of jnxAnalyzerInputType corresponds to mirroring the interface traffic. On a particular switch, the user can choose to monitor
all the ports that belong to a particular VLAN. It is needed in order to analyze the network traffic in one or more VLANs.Mirroring can be configured in ingress direction only for VLAN. Mirroring can be done on the basis of VLAN name (supported only in ingress). All packets received on a particular VLAN are sent out to the analyzer.The value two of jnxExAnalyzerInputType corresponds to mirroring vlan traffic.
Back to JUNIPER-ANALYZER-MIB MIB page.
IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network.
You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature,
RAID failures, IO statistics, connection counts, error and much more).
Easy monitoring of jnxExAnalyzerInputType with IPHost tools