dot3StatsSymbolErrors - dot3 Stats Symbol Errors

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Huawei device in your network.

dot3StatsSymbolErrors

dot3 Stats Symbol Errors
1.3.6.1.2.1.10.7.2.1.18

number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than slotTime, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' or 'carrier extend error' on the GMII. For an interface operating in full-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' on the GMII. The count represented by an instance of this object is incremented at most once per carrier event, even if multiple symbol errors occur during the carrier event. This count does not increment if a collision is present. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Back to IEEE8021-PAE-MIB MIB page.

IPHost Network monitor allows you to monitor dot3StatsSymbolErrors on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Allied Telesis VPN routers right now.

Easy monitoring of dot3StatsSymbolErrors with IPHost tools

MIBs list