dot3StatsFCSErrors - dot3 Stats FCS Errors

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Huawei device in your network.

dot3StatsFCSErrors

dot3 Stats FCS Errors
1.3.6.1.2.1.10.7.2.1.3

interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Back to IEEE8021-PAE-MIB MIB page.

IPHost Network monitor allows you to monitor dot3StatsFCSErrors on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Allied Telesis switches right now.

Easy monitoring of dot3StatsFCSErrors with IPHost tools

MIBs list