ETHER-WIS - etherWisDeviceRxTestPatternMode

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

etherWisDeviceRxTestPatternMode

ether Wis Device Rx Test Pattern Mode
1.3.6.1.2.1.10.134.1.1.1.1.2

This variable controls the receive test pattern mode. The value none(1) puts the the WIS receive path into the normal operating mode. The value prbs31(3) puts the WIS receive path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.2. The value mixedFrequency(4) puts the WIS receive path into the mixed frequency test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. Any attempt to set this object to a value other than none(1) when the corresponding instance of ifAdminStatus has the value up(1) MUST be rejected with the error inconsistentValue, and any attempt to set the corresponding instance of ifAdminStatus to the value up(1) when an instance of this object has a value other than none(1) MUST be rejected with the error inconsistentValue.

Back to ETHER-WIS MIB page.

IPHost Network monitor allows you to monitor etherWisDeviceRxTestPatternMode on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco wireless switches right now.

MIBs list