Switch ERPS Mgmt RAPS West Port

1.3.6.1.4.1.171.12.78.3.1.1.2

This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel. ::= { swERPSMgmtRAPSVlanEntry 2 } SYNTAX INTEGER { fowarding(1), blocking(2), signal-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION This is the west port state. It may change sometimes. When the west port is configured on a virtual channel, the west port state is always fowarding. ::= { swERPSMgmtRAPSVlanEntry 3 } SYNTAX INTEGER (0|1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION This is the other RPL owner port.The RPL Owner may block this port. The value 0 indicates the west port is a virtual channel. ::= { swERPSMgmtRAPSVlanEntry 4 } SYNTAX INTEGER { fowarding(1), blocking(2), signal-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION This is the east port state. It may change sometimes. When the east port is configured on a virtual channel, the east port state is always fowarding. ::= { swERPSMgmtRAPSVlanEntry 5 } SYNTAX INTEGER { none(1), west(2), east(3) } MAX-ACCESS read-write STATUS current DESCRIPTION When the port Enable state is enabled, the RPL port's current port role is defined by the application of the ERPS. ::= { swERPSMgmtRAPSVlanEntry 6 } SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions.