DOCSIS Qos Param Set Table

1.3.6.1.4.1.2011.2.25.127.7.1.2

parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC Domain. The docsQosServiceFlowId index specifies a particular Service Flow. The docsQosParamSetType index indicates whether the active, admitted, or provisioned QOS Parameter Set is being described by the row. Only the QOS Parameter Sets of Docsis 1.1 service flows are represented in this table. Docsis 1.0 QOS service profiles are not represented in this table. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages. Each object in the row corresponds to one or part of one DOCSIS 1.1 Service Flow Encoding. The docsQosParamSetBitMap object in the row indicates which particular parameters were signalled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signalled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding object in this row. Many objects are not applicable depending on the service flow direction or upstream scheduling type. The object value reported in this case is specified in the DESCRIPTION clause. ::= { docsQosMIBObjects 2 } -- docsQosParamSetEntry { docsQosParamSetTable 1 } was -- removed in an initial and unimplemented version of this mib. SYNTAX DocsQosParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A unique set of QOS parameters.