docsLoadBalChgOverStatusValue - docs Load Bal Chg Over Status Value - DOCS-LOADBALANCING-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

docsLoadBalChgOverStatusValue

docs Load Bal Chg Over Status Value

The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was changed. An active value in this entry's row status indicates that no CMTS operation is required. modemDeparting(3): The cable modem has responded with a change over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. waitToSendMessage(4): The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. cmOperationRejected(5): Channel Change (such as DCC or UCC) operation was rejected by the cable modem. cmtsOperationRejected(6) Channel Change (such as DCC or UCC) operation was rejected by the Cable modem Termination System. timeOutT13(7): Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. timeOutT15(8): T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. rejectInit(9): DCC operation rejected due to unsupported initialization tech requested. success(10): CMTS received an indication that the CM successfully completed the change over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180). In all other cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel.

Back to DOCS-LOADBALANCING-MIB MIB page.

IPHost Network monitor allows you to monitor docsLoadBalChgOverStatusValue on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

Easy monitoring of docsLoadBalChgOverStatusValue with IPHost tools

MIBs list