swL2DevCtrlBcastStormCtrl - Switch L2 Device Control Bcast Storm Control

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a D-Link device in your network.

swL2DevCtrlBcastStormCtrl

Switch L2 Device Control Bcast Storm Control
1.3.6.1.4.1.171.11.70.5.2.1.2.2

-- "This object indicates broadcast storm control function is enabled or -- disabled. The swL2PortCtrlBMDStormLimit object will descript the -- detail about the storm control . -- "This object indicates multicast storm control function is enabled or -- disabled. The swL2PortCtrlBMDStormLimit object will descript the -- detail about the storm control . -- "This object indicates destination lookup failure rate control function -- is enabled or disabled. The swL2PortCtrlBMDStormLimit object will -- descript the detail about the storm control . -- "This object to decide how many broadcast/multicast (depend on -- swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or -- swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second -- will pass thru. Beyond the limit, the device will start dropping -- that type of packet until the second interval has expired . Once the time -- interval has expired , the device will start forwarding that type of packet. As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.

Back to DES3010F-L2MGMT-MIB MIB page.

IPHost Network monitor allows you to monitor swL2DevCtrlBcastStormCtrl on D-Link device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring D-Link IP cameras right now.

Easy monitoring of swL2DevCtrlBcastStormCtrl with IPHost tools

MIBs list