p2mpTlCtrlEntry - p2mp Tl Ctrl Entry - CISCO-WIRELESS-P2MP-RF-METRICS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

p2mpTlCtrlEntry

p2mp Tl Ctrl Entry
1.3.6.1.4.1.9.9.180.2.1.1

This represents one entry in the p2mpTlCtrlTable. This table is indexed by ifIndex, p2mpTlSuMacAddress, and p2mpTlClass. At the head end: Timelines can be created on each upstream channel either on a per channel or per subscriber unit basis. When timelines are created on a per subscriber unit basis, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer (propDocsWirelessMaclayer) at the head end. When timelines are created on a per channel basis, the user must set the MAC address to zero(00 00 00 00 00 00). The channel ID is specified by the ifIndex of the upstream channel. Hence, when creating timelines on a per channel basis, the ifIndex must be set to the ifIndex of the upstream channel on which the timeline is to be created At the subscriber end: Timelines can only be created on the downstream channel. Since there is only one downstream channel, timelines cannot be created per channel ID. Hence, when a timeline is created, the user must set the MAC address (p2mpTlSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex of the downstream channel (propDocsWirelessDownstream).

Back to CISCO-WIRELESS-P2MP-RF-METRICS-MIB MIB page.

IPHost Network monitor allows you to monitor p2mpTlCtrlEntry on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of p2mpTlCtrlEntry with IPHost tools

MIBs list