CISCO-WAN-FR-X21-MIB - x21ConnectorType

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

x21ConnectorType

x21 Connector Type
1.3.6.1.4.1.351.110.4.5.1.1.1.8

back card type This object is not used by FRSM-HS2/HS2B ::= { x21CnfGrpEntry 8 } SYNTAX INTEGER { nonInvertedAndNotLooped (1), invertedAndNotLooped (2), nonInvertedAndLooped (3), invertedAndLooped (4) } MAX-ACCESS read-write STATUS current DESCRIPTION This object configures two options: a) To invert the clock sent by HS1/HS2B with the TX data or not. b) If DCE,to expect the receive clock looped back from DTE or not. If DTE,to loop back the receive clock from DCE or not. nonInvertedAndNotLooped(1)- a)=dont invert, b)=dont expect rcv clock/ dont loop rcv clock invertedAndNotLooped(2) - a)=invert, b)=dont expect rcv clock/ dont loop rcv clock nonInvertedAndLooped(3) - a)=dont invert, b)=expect rcv clock/ loop rcv clock invertedAndLooped(4) - a)=invert, b)=expect rcv clock/ loop rcv clock Enums 1 and 2 are applicable for X.21/HSSI/V.35 interfaces. Enums 3 and 4 are applicable only for V.35. Default for X.21/HSSI is nonInvertedAndNotLooped(1) Default for V.35 is nonInvertedAndLooped(3) This object is not used by FRSM-HS2/FRSM-HS2B-HSSI This object is used by FRSM-HS2B-12IN1 and default values are nonInvertedAndNotLooped(1) for X.21, nonInvertedAndLooped(3) for V.35.

Back to CISCO-WAN-FR-X21-MIB MIB page.

IPHost Network monitor allows you to monitor x21ConnectorType on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

How to get x21ConnectorType value right now?

MIBs list