With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.
portLmiSigConfMethod
port Lmi Sig Conf Method
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11
This object enables/disables the port LMI signalling autosense. Setting this object to autosense(2) enables the port to autodetect and configure port LMI signalling type. signallingProtocolType mib should be set to noSignalling while this object is being set to autosense(2). If signallingProtocolType mib is set to a value other than noSignalling while this object is being set to autosense(2), the set request fails. When this object is set to manual(1), user needs to manually configure the port LMI signalling type using the signallingProtocolType mib. signallingProtocolType can be configured to any valid value including noSignalling when this object is set to manual(1). DEFVAL { manual } ::= { frPortCnfSigLMIGrpEntry 11} frPortCntSigLMIGrp OBJECT IDENTIFIER ::= { frPortCntSig 1 } -- ------------------------------------------------------------------------ -- -- frPortCntSigLMI group -- Port counter signalling values -- -- ------------------------------------------------------------------------ SYNTAX SEQUENCE OF FrPortCntSigLMIGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table contains the LMI statistics of frame relay ports.
Back to CISCO-WAN-FR-SIGNALING-MIB MIB page.
IPHost Network monitor allows you to monitor portLmiSigConfMethod on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.
