portEqueueServiceRatio - port Equeue Service Ratio - CISCO-WAN-FR-PORT-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

portEqueueServiceRatio

port Equeue Service Ratio
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7

Number of times queue 1 is serviced for every time queue 2 is serviced. The value 0 is supported only by FRSM-VHS. FRSM-VHS supports two different egress queue servicing algorithms depending on the Egress Qos Feature. if EgrQosFeature is ENABLED, Weighted Fair queueing algorithm will be used to select one queue out of 4 data queues and this object will be set to a default value of 0 in this case and this value cannot be modified by user. In case of EgrQosFeature being DISABLED, this object will be set to a default value of 1 and can be configured to user desired value. This value will be used to decide number of times High priority queue has to be serviced for every time low priority queue is serviced. For FRSM12 card: There is only one scheme of egress scheduling of COS queues within ports, which uses only two COS queues for user data. The scheduling scheme uses a pre-defined ratio to schedule these COS queues on a given port. This object will be used to decide number of times High priority queue has to be serviced for every time low priority queue is serviced.

Back to CISCO-WAN-FR-PORT-MIB MIB page.

IPHost Network monitor allows you to monitor portEqueueServiceRatio on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco optical switches right now.

How to get portEqueueServiceRatio value right now?

MIBs list