port BERT Enable

1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21

The value of this object enables/disables the Bit Error Rate Testing (BERT) on the frame relay port. For FRSM12 card: Not Supported DEFVAL { disable } ::= { frPortCnfPortGrpEntry 21 } SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION This variable enables/disables enhanced SIW feature. Enabling this permits support for SIW translation of Appletalk. This feature is supported only in the FRSM-VHS card. This object is not required in FRSM12 since Appletalk is supported by default in FRF.8.1 and FRSM12 supports FRF.8.1 DEFVAL {disable} ::= { frPortCnfPortGrpEntry 22 } SYNTAX Integer32 (1..6000) UNITS "bytes This represents the M32 logical port Egress Queue threshold in bytes. Frames will not be queued until the number of bytes in the queue is less than the threshold. The default value is 6000. Using a very low value could under utilize the logical port. This is supported in FRSM 8t1e1 and FRSM 4t1e1 Service Modules only.