ces Buf Max Size

1.3.6.1.4.1.351.110.5.3.2.1.1.1.10

Specifies the maximum size in octets of egress buffer. CESM - 4P: Should be at least 0.6*CDVRxT for a T1 line and 0.7 * CDVRxT for a E1 line. 0 can be specified to internally compute the value Defaults for CESM-8T1E1 and CESM-T3E3 ------------------------------------- Default value of cesBufMaxSize is 0. Maximum value for CESM-8T1E1 and CESM-T3E3 ------------------------------------------- For T1 UDT and E1 UDT : 16224 bytes For T1 SDT : 384 * N bytes For E1 SDT : 417 * N bytes For T3 UDT and E3 UDT : 16224 bytes where N is the number of timeslots assigned in Nx64 connection. For T1-UDT and E1 UDT use N = 32 . Minimum value for CESM-8T1E1 and CESM-T3E3 ------------------------------------------- In CESM-8T1/E1 and CESM-T3E3 this object ( unit in bytes ) should be at least the greater of (1) CDVT in frames * 2 * N (2) ( CDVT in frames + number of frames in two cells ) * N where N is the number of timeslots assigned in Nx64 connection. For T1-UDT and E1-UDT use N = 32. --DEFVAL { ? } ::= { cesmChanCnfGrpEntry 10} SYNTAX Integer32 (125..65535) MAX-ACCESS read-write STATUS current DESCRIPTION This object specifies maximum cell arrival jitter that the reassembly process will tolerate. In case of CESM-8P it should be in increment of 125 micro secs and Max limit are as follows. T1 = 24 ms E1 = 26 ms T3 = 1.447 ms and E3 = 1.884 ms. Default values in CESM-8T1/E1 and CESM-T3/E3.: For T1 and E1 , 1000 microsecs. For T3 and E3 , 1000 microsecs.