cvaIfFXSCfgSignalType - cva If FXS Cfg Signal Type - CISCO-VOICE-ANALOG-IF-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cvaIfFXSCfgSignalType

cva If FXS Cfg Signal Type
1.3.6.1.4.1.9.9.62.1.4.1.1.1

the signaling type of FXS interface. fxsLoopStart - loop start. fxsGroundStart - ground start. DEFVAL { fxsLoopStart } ::= { cvaIfFXSCfgEntry 1 } SYNTAX INTEGER { ringFrequency25 (1), ringFrequency50 (2), ringFrequency20 (3), ringFrequency30 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION the ring frequency to be used in the FXS interface. ringFrequency25 - ring frequency 25 Hertz. ringFrequency50 - ring frequency 50 Hertz. ringFrequency20 - ring frequency 20 Hertz. ringFrequency30 - ring frequency 30 Hertz. ::= { cvaIfFXSCfgEntry 2 } --**************************************************************************** -- The Foreign Exchange Station (FXS) interface Status Table --**************************************************************************** SYNTAX SEQUENCE OF CvaIfFXSStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The Foreign Exchange Station (FXS) interface Status Table. It contains hook status, ring active and other states of the interface. ::= { cvaIfFXSObjects 2 } SYNTAX CvaIfFXSStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the status table for each FXS interface. AUGMENTS { cvaIfFXSCfgEntry } ::= { cvaIfFXSStatusTable 1 } CvaIfFXSStatusEntry ::= SEQUENCE { cvaIfFXSHookStatus INTEGER, cvaIfFXSRingActive TruthValue, cvaIfFXSRingGround TruthValue, cvaIfFXSTipGround TruthValue } SYNTAX INTEGER { onHook (1), offHook (2), trunked (3) } MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the hook status of FXS interface. onHook - the connected equipment(e.g., phone) is onHook. offHook - the connected equipment is offHook. trunked - the connected equipment is trunked. ::= { cvaIfFXSStatusEntry 1 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the outgoing ring active indication. If the object value is true, then the interface is currently generating ring out to the Key Telephone System (KTS) or Plain Old Telephone (POT); otherwise, it doesn't. ::= { cvaIfFXSStatusEntry 2 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the incoming ring ground indication. It is only valid when the cvaIfFXSCfgSignalType is fxsGroundStart. If the object is true, then the interface is presenting a ring ground to the connected equipment; otherwise, it doesn't. ::= { cvaIfFXSStatusEntry 3 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the incoming tip ground indication. It is only valid when the cvaIfFXSCfgSignalType is fxsGroundStart. If the object is true, then the interface is detecting a tip ground at the interface; otherwise, it doesn't. ::= { cvaIfFXSStatusEntry 4 } --**************************************************************************** -- The FXS Timing Parameters Table --**************************************************************************** -- This table contains the FXS interface timing parameters information. SYNTAX SEQUENCE OF CvaIfFXSTimingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The FXS interface Timing Parameters table. It contains the configuration of the various FXS signaling protocol timing parameters. ::= { cvaIfFXSObjects 3 } SYNTAX CvaIfFXSTimingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the FXS Timing Parameters Table for each FXS interface.

Back to CISCO-VOICE-ANALOG-IF-MIB MIB page.

IPHost Network monitor allows you to monitor cvaIfFXSCfgSignalType on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco optical switches right now.

Easy monitoring of cvaIfFXSCfgSignalType with IPHost tools

MIBs list