CISCO-VLAN-MEMBERSHIP-MIB - vmMembershipSummaryMemberPorts

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

vmMembershipSummaryMemberPorts

vm Membership Summary Member Ports
1.3.6.1.4.1.9.9.68.1.2.1.1.2

The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493).

Back to CISCO-VLAN-MEMBERSHIP-MIB MIB page.

IPHost Network monitor allows you to monitor vmMembershipSummaryMemberPorts on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of vmMembershipSummaryMemberPorts with IPHost tools

MIBs list