vism Svc Atm Qos Cdv

1.3.6.1.4.1.351.110.5.5.19.1.1

End-to-end cell delay variation used in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. The value specified to this object is in 'micro-seconds'. This value is sent in voice SVC setup messages in extended quality of services information element as the objective value. REFERENCE The references are from ATM Forum 'Voice & Telephony over ATM' specifications af-vtoa-0089.000, af-vtoa-0113.000. DEFVAL { 20000 } ::= { vismSvcAtmQosGrp 1 } SYNTAX Integer32 (20000..150000) MAX-ACCESS read-write STATUS current DESCRIPTION End-to-end maximum cell transfer delay used in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. The value specified to this object is in 'micro-seconds'. This value is sent in voice SVC setup messages in end-to-end transit delay information element as the objective value. REFERENCE The references are from ITU G-Series Recommendations: G.114 - One-way transmission time. DEFVAL { 150000 } ::= { vismSvcAtmQosGrp 2 } SYNTAX Integer32 (4..8) MAX-ACCESS read-write STATUS current DESCRIPTION Maximum Cell Loss Ratio used in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. This value is sent in voice SVC setup messages in extended quality of services information element as maximum cell loss ratio value. REFERENCE The references are from BellCore specifications - GR.1110 DEFVAL { 8 } ::= { vismSvcAtmQosGrp 3 } SYNTAX Integer32 (50..200) MAX-ACCESS read-write STATUS current DESCRIPTION Traffic scaling Factor used to compute factored bandwidth which is used in ATM signaling to establish voice SVC. When this value is less than 100 it can be referred as a `discount factor' and when more than 100 referred as an `excess factor' It is applicable only to VBR SVC connection establishment. The traffic scaling is not applicable to AAL2 SVC calls that require G.711 and clear channel codecs DEFVAL { 100 } ::= { vismSvcTrfScalingGrp 1 } SYNTAX Integer32 (8..255) MAX-ACCESS read-write STATUS current DESCRIPTION The default AAL2 Channel IDentification (CID) number used for AAL2 SVC connections. REFERENCE The references are from ITU I-Series Recommendations: I.363.2 B-ISDN ATM Adaptation Layer specification: Type 2 AAL. DEFVAL { 100 } ::= { vismSvcAal2CidGrp 1 } -- conformance information ciscoVismSvcMIBConformance OBJECT IDENTIFIER ::= { ciscoVismSvcMIB 2 } ciscoVismSvcMIBGroups OBJECT IDENTIFIER ::= { ciscoVismSvcMIBConformance 1 } ciscoVismSvcMIBCompliances OBJECT IDENTIFIER ::= { ciscoVismSvcMIBConformance 2 } -- compliance statements ciscoVismSvcCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION The compliance statement for objects related to VISM SVC module.