vism Alt Codec String1

1.3.6.1.4.1.351.110.5.5.18.1.1.7

This is an alternate codec string to that specified in vismCodecString. This object will also serve as a mapping string along with the vismCodecString object and the VISM will use the value in these objects to match the SDP descriptor string obtained for a codec in a CRCX or MDCX(ModifyConnection) message. If alternate codec strings need to be configured, this object will need to be configured first. The local connection option or SDP(Session Description Protocol) descriptor string that VISM would get from the call agent for the codec to be used will be in the form of PCMU, PCMA, G726 at rate 32 kbps, G729a, CCD ..... where in PCMU stands for G711u PCMA stands for G711a and CCD stands for clear channel This is an optional parameter which, if not configured, has a default value as specified. DEFVAL {""} ::= { vismCodecCnfEntry 7 } SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION This is an alternate codec string to that specified in vismCodecString and vismAltCodecString1. This object will also serve as a mapping string along with the vismCodecString and vismAltCodecString1 objects and the VISM will use the value in these objects to match the SDP descriptor string obtained for a codec in a CRCX or MDCX(ModifyConnection) message. If alternate codec strings needs to be configured, this object will need to be configured second after vismAltCodecString1. The local connection option or SDP(Session Description Protocol) descriptor string that VISM would get from the call agent for the codec to be used will be in the form of PCMU, PCMA, G726 at rate 32 kbps, G729a, CCD ..... where in PCMU stands for G711u PCMA stands for G711a and CCD stands for clear channel This is an optional parameter which, if not configured, has a default value as specified. DEFVAL {""} ::= { vismCodecCnfEntry 8 } SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION This is an alternate codec string to that specified in vismCodecString vismAltCodecString1 and vismAltCodecString2. This object will also serve as a mapping string along with the vismCodecString, vismAltCodecString1 and vismAltCodecString2 objects and the VISM will use the value in these objects to match the SDP descriptor string obtained for a codec in a CRCX or MDCX(ModifyConnection) message. If alternate codec strings need to be configured, this object will need to be configured third after vismAltCodecString1 and vismAltCodecString2. The local connection option or SDP(Session Description Protocol) descriptor string that VISM would get from the call agent for the codec to be used will be in the form of PCMU, PCMA, G726 at rate 32 kbps, G729a, CCD ..... where in PCMU stands for G711u PCMA stands for G711a and CCD stands for clear channel This is an optional parameter which, if not configured, has a default value as specified. DEFVAL {""} ::= { vismCodecCnfEntry 9 } --- -- VISM Codec Template Configuration group --- SYNTAX SEQUENCE OF VismCodecTemplateCnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table defines the DSP templates that are applicable on a card basis. It defines the set of codecs supported in each template and the maximum number of DS0s supported on the VISM card for a given template. ::= { vismCodecTemplateCnfGrp 1 } SYNTAX VismCodecTemplateCnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry is defined for each set of codecs supported. The codecs supported are a combination of : G.711Mu (PCM - Mu-law) G.711A (PCM - A-law) G.726/32 (ADPCM) G.729a (CS-ACELP - Annex A) G.729ab (CS-ACELP - Annex B) clearChannel (clear channel voice) G.723.1-H G.723.1a-H G.723.1-L G.723.1a-L Lossless INDEX { vismCodecTemplateNum } ::= { vismCodecTemplateCnfGrpTable 1 } VismCodecTemplateCnfGrpEntry ::= SEQUENCE { vismCodecTemplateNum Integer32, vismCodecSupported Integer32, vismCodecTemplateMaxChanCount Integer32 } SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION This attribute defines the index for the CodecTemplate table. Template number is input at the time of configuring a template using 'cncodectmpl' CLI command.