cseFlowMcastResultHFlag3k4k - CISCO SWITCH ENGINE Flow Mcast Result H Flag3k4k - CISCO-SWITCH-ENGINE-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cseFlowMcastResultHFlag3k4k

CISCO SWITCH ENGINE Flow Mcast Result H Flag3k4k
1.3.6.1.4.1.9.9.97.1.2.13.1.21

A string of octets containing one bit per out-going interface (VLAN) with VlanIndex values of 2048 through 4095. Each octet within the value of this object specifies a set of eight VLANs, e.g. the first octet corresponding to VLANs with VlanIndex values of 2048 through 2055, the second octet to VLANs 2056 through 2063 etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN, thus each vlan is represented by a single bit within the octet. The bits in this object will be set to '1' if the multicast layer 3 flow described by this row instance is hardware switched on the corresponding VLAN. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.

Back to CISCO-SWITCH-ENGINE-MIB MIB page.

IPHost Network monitor allows you to monitor cseFlowMcastResultHFlag3k4k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of cseFlowMcastResultHFlag3k4k with IPHost tools

MIBs list