stpxSMSTInstanceEditVlansMap3k4k - stpx SMST Instance Edit Vlans Map3k4k - CISCO-STP-EXTENSIONS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

stpxSMSTInstanceEditVlansMap3k4k

stpx SMST Instance Edit Vlans Map3k4k
1.3.6.1.4.1.9.9.82.1.14.6.1.3

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance with the range from 0 to stpxSMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to SMST instance 0 by the device. If the bit corresponding to a VLAN is changed from '0' to '1', then that VLAN will be automatically removed from the MST instance this VLAN was previously mapped to. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.

Back to CISCO-STP-EXTENSIONS-MIB MIB page.

IPHost Network monitor allows you to monitor stpxSMSTInstanceEditVlansMap3k4k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of stpxSMSTInstanceEditVlansMap3k4k with IPHost tools

MIBs list