portChannelAdminStatus - port Channel Admin Status - CISCO-STACK-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

portChannelAdminStatus

port Channel Admin Status
1.3.6.1.4.1.9.5.1.18.1.1.4

channel ports. If the status is set to on(1), the channelling is enabled. If the status is set to off(2), the channelling is disabled. If the status is set to desirable(3), the port initiates a pagp negotiation request to become a channel and will become a channel if the far end agrees. If the status is set to auto(4), the port does not initiate a request to become a channel but will do so if it receives a request to become a channel from the far end. If the status is set to desirableSilent(5), the port initiates a pagp negotiation request to become a channel and will become a channel if the far end agrees. If the port doesn't receive any packets from far end, then after some timeout period the port forms a channel by itself. If the status is set to autoSilent(6), the port does not initiate a request to become a channel, but will do so if it receives a request to become a channel from the far end. If the port doesn't receive any request, then after some timeout period the port forms a channel by itself.

Back to CISCO-STACK-MIB MIB page.

IPHost Network monitor allows you to monitor portChannelAdminStatus on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

Easy monitoring of portChannelAdminStatus with IPHost tools

MIBs list