csAu4Tug3Payload - cs Au4 Tug3 Payload - CISCO-SONET-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

csAu4Tug3Payload

cs Au4 Tug3 Payload
1.3.6.1.4.1.9.9.126.1.9.1.1.2

This object is used for configuring the payload for the tributary group. The possible values are : vc11 : When set to 'vc11' following things are done: - 28 entries created in ifTable for TU-11 with ifType = sonetVT(51) - 28 entries created in ifTable for DS1 with ifType = ds1(18) STM1<-AU-4<-TUG-3<-TUG-2<-TU-11<-VC11 vc12 : When set to 'vc12' following things are done: - 21 entries created in ifTable for TU-12 with ifType = sonetVT(51) - 21 entries created in ifTable for E1 with ifType = ds1(18) STM1<-AU-4<-TUG-3<-TUG-2<-TU-12<-VC12 tu3ds3 : When set to 'tu3ds3' following things are done: - 1 entry created in ifTable for TU-3 with ifType = sonetVT(51) - 1 entry created in ifTable for DS3 with ifType = ds3(30) STM1<-AU-4<-TUG-3<-TU-3<-VC3 tu3e3 : When set to 'tu3e3' following things are done: - 1 entry created in ifTable for TU-3 with ifType = sonetVT(51) - 1 entry created in ifTable for E3 with ifType = ds3(30) STM1<-AU-4<-TUG-3<-TU-3<-VC3 The value 'other' can not be set. DEFVAL { vc11 } ::= { csAu4Tug3ConfigEntry 2 } -- Notifications Enable/Disable SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION This object controls if the generation of ciscoSonetSectionStatusChange, ciscoSonetLineStatusChange, ciscoSonetPathStatusChange and ciscoSonetVTStatusChange notifications is enabled. If the value of this object is 'true(1)', then all notifications in this MIB are enabled; otherwise they are disabled.

Back to CISCO-SONET-MIB MIB page.

IPHost Network monitor allows you to monitor csAu4Tug3Payload on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of csAu4Tug3Payload with IPHost tools

MIBs list