crcERSpanIFRowStatus - crc ER Span IF Row Status - CISCO-RMON-CONFIG-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

crcERSpanIFRowStatus

crc ER Span IF Row Status
1.3.6.1.4.1.9.9.103.1.2.6.1.3

Defines the status of this entry. For this object to be active(1), the crcERSpanSessionRowStatus from crcERSpanSessionTable, mapped via crcERSpanSessionNo, must be active(1). If the said crcERSpanSessionRowStatus transistions to notInService(2) or destroy(6), all corresponding entries from crcERSpanIFTable will be deleted. In order to configure a source to destination traffic copy relationship, crcERSpanIFIndex MUST be present as an ifEntry in the ifTable and its respective ifAdminStatus and ifOperStatus values MUST be equal to 'up(1)'. If the value of any of those two objects changes after the crcERSpanSessionEntry is activated, crcERSpanSessionRowStatus will transition to 'notReady(3)'. The capability of crcERSpanIFIndex to be source or destination of a port copy operation is described by the 'copySourcePort(0)' and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits SHOULD be appropriately set by the agent, in order to allow for a crcERSpanIFEntry to be created.

Back to CISCO-RMON-CONFIG-MIB MIB page.

IPHost Network monitor allows you to monitor crcERSpanIFRowStatus on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of crcERSpanIFRowStatus with IPHost tools

MIBs list