CISCO-PRIVATE-VLAN-MIB - cpvlanTrunkPortSecondaryVlans4k

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cpvlanTrunkPortSecondaryVlans4k

cpvlan Trunk Port Secondary Vlans4k
1.3.6.1.4.1.9.9.173.1.2.4.1.7

A string of octets containing one bit per VLAN for VLANs with values of 3072 through 4095 in the management domain on this port. If the VLAN represented by setting a bit to '1' in the bitmap is a secondary VLAN that has already been associated with a primary VLAN, it allows this private VLAN trunk port to remap the secondary VLAN to its primary VLAN for ingress traffic and to remap its associated primary VLAN to the secondary VLAN for egress traffic. If the bit corresponding to a VLAN is set to '1' and if the corresponding VLAN is a secondary VLAN, then the local system is enabled to transmit and receive frames with proper VLAN remapping via this Private VLAN trunk port. If the bit corresponding to a VLAN is set to '0', and if the corresponding VLAN is not configured as a normal VLAN, then the system is disabled from sending and receiving frames on that VLAN via this Private VLAN trunk port. This object is only instantiated on devices which support the range of up to 4095.

Back to CISCO-PRIVATE-VLAN-MIB MIB page.

IPHost Network monitor allows you to monitor cpvlanTrunkPortSecondaryVlans4k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

Easy monitoring of cpvlanTrunkPortSecondaryVlans4k with IPHost tools

MIBs list