CISCO-PREFERRED-PATH-MIB - cPrefPathRouteMapSetTable

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cPrefPathRouteMapSetTable

Cisco Pref Path Route Map Set Table
1.3.6.1.4.1.9.9.592.1.1.4

This table allows to configure and monitor the set criteria for a route within a fcroute-map created using the cPrefPathRouteMapTable table. Each set criteria allows user to setup an action on the classified or matched traffic flow created using the cPrefPathRouteMapMatchTable table. Each set criteria allows user to setup an outgoing interface, and associate it with a preference level. Preference level indicates the priority of the interface during the selection in case multiple outgoing interfaces are configured. Match criteria configured using the cPrefPathRouteMapMatchTable table for a route within a fcroute-map and the set criteria (this table) configured for the same route within a fcroute-map go together as (match, set) pair. Which means that those matched traffic flows will be forwarded or routed via the interface selected based on the preference level in the set criteria (this table). Each entry in this table is indexed by the - cPrefPathRouteMapVsanIndex - cPrefPathRouteMapRouteIndex - cPrefPathRMapSetIntfPref Note any changes or updates made to the set criteria would require the corresponding route or the corresponding fcroute-map to be activated again. Entries in this table are created and deleted using the cPrefPathRMapSetRowStatus object. To create a row in this table, a manager must set the cPrefPathRMapSetRowStatus object to 'createAndGo' or 'createAndWait'. This will create a set criteria for a route within a fcroute-map. It is required to configure instances of cPrefPathRMapSetIntf column before or concurrently in order to make the newly created row to active. To delete a row in this table, a manager must set the cPrefPathRMapSetRowStatus object to 'destroy'. This table is dependent on cPrefPathRouteMapTable table. The association between this table and the cPrefPathRouteMapTable table is through the common indices - cPrefPathRouteMapVsanIndex and cPrefPathRouteMapVsanIndex. All the entries in this table with the indices - cPrefPathRouteMapVsanIndex and cPrefPathRouteMapRouteIndex is in fact the set criteria associated with the route within a fcroute-map, which are created and activated in the cPrefPathRouteMapTable Table. When the row corresponding to indices - cPrefPathRouteMapVsanIndex and cPrefPathRouteMapRouteIndex in the cPrefPathRouteMapTable is destroyed then all the rows in this table with those indices will be destroyed.

Back to CISCO-PREFERRED-PATH-MIB MIB page.

IPHost Network monitor allows you to monitor cPrefPathRouteMapSetTable on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of cPrefPathRouteMapSetTable with IPHost tools

MIBs list