cpm DS0 Busyout Notify Enable

1.3.6.1.4.1.9.10.19.1.5.1

This variable controls generation of cpmDS0BusyoutNotification. When this variable is 'true(1)', generation of cpmDS0BusyoutNotification is enabled. When this variable is 'false(2)', generation of cpmDS0BusyoutNotification is disabled. The default value is 'false(2)'. ::= { cpmDS0Status 1 } SYNTAX SEQUENCE OF CpmDS0StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The DS0 Status Table provides additional DS0 level information and configuration. This table is an extension of the cpmDS0UsageTable. ::= { cpmDS0Status 2 } SYNTAX CpmDS0StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Status for an individual DS0. This entry AUGMENTS the cpmDS0UsageEntry. An entry exists for each configured DS0 in the system. AUGMENTS { cpmDS0UsageEntry } ::= { cpmDS0StatusTable 1 } CpmDS0StatusEntry ::= SEQUENCE { cpmDS0OperStatus INTEGER, cpmDS0BusyoutAdminStatus INTEGER, cpmDS0BusyoutAllow TruthValue, cpmDS0BusyoutStatus INTEGER, cpmDS0BusyoutSource INTEGER, cpmDS0BusyoutTime TimeStamp, cpmDS0ConfigFunction INTEGER, cpmDS0InterfaceIndex InterfaceIndexOrZero } SYNTAX INTEGER { unknown(1), down(2), idle(3), setup(4), connected(5), test(6) } MAX-ACCESS read-only STATUS current DESCRIPTION The operational state of the DSO. This object provides more detailed information than the IF-MIB ifOperStatus. unknown - The DSO is in an unknown state down - The DS0 is out of service idle - This DS0 is currently idle setup - A new connection is in the process of being established connected - A active connection exists test - The DSO is undergoing internal testing ::= { cpmDS0StatusEntry 1 } SYNTAX INTEGER { noBusyout(1), busyout(2), busyoutImmediate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION The administratively requested busyout state of the DSO. This object represents the desired busyout state of the DS0, which may or may not be reflected in the operation state, cpmDS0OperStatus. This object may be set via SNMP or the system console. noBusyout - No administrative busyout has been requested busyout - The DS0 will be shutdown when it next transitions to idle(2) cpmDS0OperStatus busyoutImmediate - Immediately transition the DS0 to down(2), terminating any current activity The effect of setting this object to busyout or busyoutImmediate is constrained by the value of cpmDS0BusyoutAllowed. If cpmDS0BusyoutAllowed has a value of false, attempting to set this object to busyout or busyoutImmediate will fail. This object provides more busyout information not available from the IF-MIB ifAdminStatus. This object reflects busyout requests configured on the local system as defined for the object cpmDS0BusyoutSource. ::= { cpmDS0StatusEntry 2 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION The object indicates if busyout requests for this DSO will be allowed. true - Setting cpmDS0BusyoutAdminStatus to busyout(2) or busyoutImmediate(3) will be accepted false - Busyout requests for this DS0 are not allowed The default value is true(1). If cpmDS0BusyoutAllowed has a value of false(2), attempting to set cpmDS0BusyoutAdminStatus to busyout or busyoutImmediate will fail. This object only constrains setting the value of cpmDS0BusyoutAdminStatus when cpmDS0BusyoutAdminStatus is set via SNMP. ::= { cpmDS0StatusEntry 3 } SYNTAX INTEGER { noBusyout(1), busyoutPending(2), busiedOut(3) } MAX-ACCESS read-only STATUS current DESCRIPTION The busyout status of the DSO. noBusyout - The DS0 is not busied out nor has a busyout pending. busyoutPending - The DS0 has a busyout request pending. It will shutdown when it next transitions to idle(2) cpmDS0OperStatus. busiedOut - The DS0 is out of service due to a busyout request. This object is needed to reflect busyouts initiated other than administrativly, as described in cpmDS0BusyoutSource. ::= { cpmDS0StatusEntry 4 } SYNTAX INTEGER { none(1), local(2), internal(3), remote(4) } MAX-ACCESS read-only STATUS current DESCRIPTION The source of the busyout request either pending or active for the DSO. none - The DS0 is not busied out nor has a busyout request pending local - The DS0 is busied out or has a pending request due to an adminstrative command issued locally. internal - The DS0 is busied out or has a pending request due to internal system processing. remote - The DS0 is busied out or has a pending request due to a request from the peer switch. ::= { cpmDS0StatusEntry 5 } SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION Value of sysUpTime when the most recent busyout request was issued for this DS0. The value is zero indicates no busyout request has been issued. ::= { cpmDS0StatusEntry 6 } SYNTAX INTEGER { unknown(1), t1CcsSignallingChan(2), t1CcsBearerChan(3), e1CcsSignallingChan(4), e1CcsBearerChan(5), t1CasChan(6), e1CasChan(7) } MAX-ACCESS read-only STATUS current DESCRIPTION The object indicates the function this DSO is configured to provide. This object provides more detail than cpmConfiguredType. unknown - Unknown configuration t1SignallingChan - DS0 is configured as a T1 common channel signalling (CCS) such as ISDN PRI D-channel t1CcsBearerChan - DS0 is configured as a T1 common channel signalling (CCS) bearer channel e1SignallingChan - DS0 is configured as a E1 common channel signalling (CCS) such as ISDN PRI D-channel e1CcsBearerChan - DS0 is configured as a E1 common channel signalling (CCS) bearer channel t1CasChan - DS0 is configured as a T1 channel associated signalling channel e1CasChan - DS0 is configured as a E1 channel associated signalling channel ::= { cpmDS0StatusEntry 7 } SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION This is the value of ifIndex in the ifTable for this DS0.