dsx3FEAlarmUpCount - dsx3 FE Alarm Up Count - CISCO-MGX82XX-DSX3-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

dsx3FEAlarmUpCount

dsx3 FE Alarm Up Count
1.3.6.1.4.1.351.110.4.4.1.2.1.1.6

This parameter specifies the increment to the Far End alarm integration counters. The local alarms are RAI and AIS. The Default value is 6 and the integration counter is incremented by this value every 10 ms while the alarm persists. The counter is decremented by the value of dsx3FEAlarmDnCount while there is no alarm (the counter does not decrement below zero). When the integration counter exceeds dsx3FEAlarmThreshold an Alarm of the severity specified for the particular far end alarm is declared. This object is not applicable for CESM-T3/E3.

Back to CISCO-MGX82XX-DSX3-MIB MIB page.

IPHost Network monitor allows you to monitor dsx3FEAlarmUpCount on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of dsx3FEAlarmUpCount with IPHost tools

MIBs list