dsx3FEAlarmDownCount - dsx3 FE Alarm Down Count - CISCO-MGX82XX-DSX3-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

dsx3FEAlarmDownCount

dsx3 FE Alarm Down Count
1.3.6.1.4.1.351.110.4.4.1.2.1.1.7

This parameter specifies the decrement to the Far End alarm integration counters. The local alarms are AIS and RAI. The Default value is 1. The integration counter is decremented by this value every 10 ms (till zero), while no alarm persists. The counter is incremented by the value of dsx3FEAlarmUpCount while there is no alarm. When the integration counter decrements to zero any previously declared Alarm is removed. This object is not applicable for CESM-T3/E3.

Back to CISCO-MGX82XX-DSX3-MIB MIB page.

IPHost Network monitor allows you to monitor dsx3FEAlarmDownCount on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

Easy monitoring of dsx3FEAlarmDownCount with IPHost tools

MIBs list