CISCO-LWAPP-IDS-MIB - cLIdsClientExclTable

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cLIdsClientExclTable

Cisco L Ids Client Excl Table
1.3.6.1.4.1.9.9.519.1.2.1

This table lists those clients whose data packets are to be blocked as requested by the IPS sensor due to the detection of attacks at layer 3 to layer 7 involving the particular client. This table has an expansion dependent relationship with cLIdsIpsSensorConfigTable. There may exist one or more rows corresponding to the row for each sensor configured through cLIdsIpsSensorConfigTable. An entry is added to this row by the agent when the controller receives the block request from one of the IPS sensors configured through cLIdsIpsSensorConfigTable. The controller sends the ciscoLwappIdsShunClientUpdate notification to indicate that the controller shall be blocking the particular client for a period equal to cLIdsClientTimeRemaining. The entry corresponding to a particular client is removed when one of the following happens. (i) When the configuration about the particular IPS sensor is removed from the controller, either through an explicit management action initiated through the NMS or when the controller reboots. (ii) When the remaining time period for which the client will be blocked as indicated by cLIdsClientTimeRemaining, expires. (iii) When the IPS sensor explicitly requests the controller to stop blocking the client's data packets. The controller sends the ciscoLwappIdsShunClientUpdate notification with cLIdsClientTimeRemaining equal to 0 to indicate that the client won't be blocked any further, on one of the three conditions for entry removal mentioned above.

Back to CISCO-LWAPP-IDS-MIB MIB page.

IPHost Network monitor allows you to monitor cLIdsClientExclTable on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco wireless switches right now.

MIBs list