CISCO-IF-CALL-SERVICE-MIB - cicServiceTable

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cicServiceTable

cic Service Table
1.3.6.1.4.1.9.9.9968.1.1.1

This table defines the parameters related to the call service state administration for the interfaces on media gateway. The possible interfaces include channelized sonet interface, DS1 interface, etc.. ::= { cicServiceConfig 1 } SYNTAX CicServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry containing service administration information applicable to a particular interface. INDEX { ifIndex } ::= {cicServiceTable 1} CicServiceEntry ::= SEQUENCE { cicServiceOperState CIfCallServiceOperState, cicServiceAdminState CIfCallServiceAdminState, cicServiceGraceTime Unsigned32, cicServiceRepetition ConfigIterator, cicServiceRepeatOwner OwnerString, cicServiceRepeatResult BulkConfigResult } SYNTAX CIfCallServiceOperState MAX-ACCESS read-only STATUS current DESCRIPTION This object indicates the current operating state of the service in the interface. The entry in this table is also in ifTable(the index of this table is ifIndex). The 'cicServiceOperState' of the entry is not only dependent on the 'cicServiceAdminState', it is also dependent on the 'ifOperStatus' of ifTable. The following is the relationship between 'cicServiceAdminState' and 'ifOperStatus': cicServiceOperState cicServiceAdminState ifOperStatus ---------------- ----------------- ------------ inService inService up outOfService forcefulOutOfService up oosPending gracefulOutOfService up outOfService inService down outOfService forcefulOutOfService down outOfService gracefulOutOfService down ::= { cicServiceEntry 1 } SYNTAX CIfCallServiceAdminState MAX-ACCESS read-write STATUS current DESCRIPTION This object is used to change the desired service state of the interface. The operational service state of the interface is indicated by 'cicServiceOperState'. DEFVAL { inService } ::= { cicServiceEntry 2 } SYNTAX Unsigned32(0..65535) UNITS "seconds This object specifies the amount of time before the existing call connections been gracefully shutdown in the interface when 'cicServiceAdminState' is set to 'gracefulOutOfService'. This object is not applicable if 'cicServiceAdminState' is set to 'forcefulOutOfService'. The value of 0 specifies that the service on the interface will not be put outOfService until the call connection over the interface is terminated. DEFVAL { 0 } ::= { cicServiceEntry 3 } SYNTAX ConfigIterator MAX-ACCESS read-write STATUS current DESCRIPTION This object is used to change service state to multiple interfaces by repeatedly applying the writable objects of cicServiceTable specified in the same SNMP PDU starting from the row specified by the instance value in INDEX for the number of rows specified in this object. The order of operation is iterated through the logical order of the interface. Whether the iteration will be applied across the physical boundary or not is depends upon the system implementation. The GET operation on this object will always return 1.

Back to CISCO-IF-CALL-SERVICE-MIB MIB page.

IPHost Network monitor allows you to monitor cicServiceTable on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

MIBs list