cpwVcMplsExpBitsMode - Cisco Pseudo Wire Vc Mpls Exp Bits Mode - CISCO-IETF-PW-MPLS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cpwVcMplsExpBitsMode

Cisco Pseudo Wire Vc Mpls Exp Bits Mode
1.3.6.1.4.1.9.10.107.1.1.1.2

Set by the operator to indicate the way the VC shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - cpwVcMplsMplsType is mplsTe or mplsNonTe. Note that in this case there is no need to mark the VC label with the EXP bits since the VC label is not visible to the intermediate nodes. If there is no outer tunnel, specifiedValue(2) indicate that the value is specified by cpwVcMplsExpBits, and serviceDependant(3) indicate that the EXP bits are setup based on a rule specified in the emulated service specific tables, for example when the EXP bits are a function of 802.1p marking for Ethernet emulated service.

Back to CISCO-IETF-PW-MPLS-MIB MIB page.

IPHost Network monitor allows you to monitor cpwVcMplsExpBitsMode on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

Easy monitoring of cpwVcMplsExpBitsMode with IPHost tools

MIBs list