cdot1agVlanVid - Cisco IEEE 802.1ag Vlan Vid

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cdot1agVlanVid

Cisco IEEE 802.1ag Vlan Vid
1.3.6.1.4.1.9.9.604.1.3.1.1.1

This is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. ::= { cdot1agVlanEntry 1 } SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION This is the Primary VLAN ID of the VLAN with which this entry's cdot1agVlanVid is associated. This value must not equal the value of cdot1agVlanVid. ::= { cdot1agVlanEntry 2 } SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. ::= { cdot1agVlanEntry 3 } -- ******************************************************************* -- The Default MD Level object. This group will contain all the -- MIB objects needed to access and modify default MD level -- managed objects. -- ******************************************************************* SYNTAX Cdot1agMDLevel MAX-ACCESS read-write STATUS current DESCRIPTION A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each cdot1agDefaultMdEntry whose cdot1agDefaultMdLevel object contains the value -1. After this initialization, this object needs to be persistent upon reboot or restart of a device. REFERENCE 802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b

Back to CISCO-IEEE-CFM-MIB MIB page.

IPHost Network monitor allows you to monitor cdot1agVlanVid on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

Easy monitoring of cdot1agVlanVid with IPHost tools

MIBs list