cHcAlarmFallingThreshAbsValueHi - Cisco High Capacity Alarm Falling Threshold Abs Value Hi

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cHcAlarmFallingThreshAbsValueHi

Cisco High Capacity Alarm Falling Threshold Abs Value Hi
1.3.6.1.4.1.9.10.93.1.1.1.1.12

The upper 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the cHcAlarmFallingThreshAbsValueLo and cHcAlarmFallingThrsholdValStatus objects, as follows: ABS(threshold) = cHcAlarmFallingThreshAbsValueLo + (cHcAlarmFallingThreshAbsValueHi * 2^^32) The absolute value of the threshold is adjusted as required, as described in the CHcValueStatus textual convention. These three object instances are conceptually combined to represent the falling threshold for this entry. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated cHcAlarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the threshold identified by the cHcAlarmRisingThreshAbsValueLo, cHcAlarmRisingThreshAbsValueHi, and cHcAlarmRisingThresholdValStatus objects. This object may not be modified if the associated cHcAlarmStatus object is equal to active(1).

Back to CISCO-HC-ALARM-MIB MIB page.

IPHost Network monitor allows you to monitor cHcAlarmFallingThreshAbsValueHi on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

Easy monitoring of cHcAlarmFallingThreshAbsValueHi with IPHost tools

MIBs list