cgprsAccPtVerifyUpStrTpduDstAddr - Cisco GPRS Access Point Verify Up Str Tpdu Dst Address

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cgprsAccPtVerifyUpStrTpduDstAddr

Cisco GPRS Access Point Verify Up Str Tpdu Dst Address
1.3.6.1.4.1.9.9.183.1.1.3.1.6

When this object is set to 'true', Gateway will check the upstream TPDU destination address against the range of IP addresses reserved for PLMN devices. If there is a match, the TPDU is dropped, the notification cgprsAccPtSecDestViolNotif is generated and cgprsAccPtDestAddrViolTpdus is incremented. The configuration of IP address ranges reserved for PLMN device is out of the scope of this MIB. This check would enable the Gateway to protect the GPRS network from some hacker who may try to flood the Gateway and PLMN nodes with intense data traffic. When the object is set to 'false', no checking is performed by the Gateway.

Back to CISCO-GPRS-ACC-PT-MIB MIB page.

IPHost Network monitor allows you to monitor cgprsAccPtVerifyUpStrTpduDstAddr on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

Easy monitoring of cgprsAccPtVerifyUpStrTpduDstAddr with IPHost tools

MIBs list