cspanSourcesVsans2k - Cisco Switched Port Analyzer Sources Vsans2k

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cspanSourcesVsans2k

Cisco Switched Port Analyzer Sources Vsans2k
1.3.6.1.4.1.9.9.363.1.1.4.1.1

The VSANs that are traffic sources to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 through 16, etc. Since there are 256 octets, the range of VSANs is from 0-2047. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. ::= { cspanSourcesVsanEntry 1 } SYNTAX FcList MAX-ACCESS read-only STATUS current DESCRIPTION The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying VSAN 2056 through 2063, etc. Since there are 256 octets, he range of VSANs is from 2048 through 4095. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'.

Back to CISCO-FC-SPAN-MIB MIB page.

IPHost Network monitor allows you to monitor cspanSourcesVsans2k on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

Easy monitoring of cspanSourcesVsans2k with IPHost tools

MIBs list