Cisco Entity Redundancy Vendor Type

1.3.6.1.4.1.9.9.498.1.1.2.1.1

Each row lists a specific entPhysicalVendorType which is allowed as a member for groups of the type specified by the ceRedunGroupTypeIndex. Note: Normally an index object would have MAX-ACCESS of not-accessible, but since the table contains only this index object, the access is read-only. ::= { ceRedunVendorTypesEntry 1 } -- Internal State Description table SYNTAX SEQUENCE OF CeRedunInternalStatesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table allows the managed system to report a read-only list of internal state numbers and the corresponding descriptions which apply for the members of a particular redundancy group type. If the ceRedunGroupDefinitionChanged object changes for a particular ceRedunGroupTypeIndex, then this table may have changed and should be read again. ::= { ceRedunGroup 3 } SYNTAX CeRedunInternalStatesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A conceptual row in the ceRedunInternalStatesTable. INDEX { ceRedunGroupTypeIndex, ceRedunInternalStateIndex } ::= { ceRedunInternalStatesTable 1 } CeRedunInternalStatesEntry ::= SEQUENCE { ceRedunInternalStateIndex Unsigned32, ceRedunStateCategory CeRedunStateCategories, ceRedunInternalStateDescr SnmpAdminString } SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION This is an index corresponding to an internal state of a member for a redundancy group of type ceRedunGroupTypeIndex. The state may include any of the initialization or intermediate progression states necessary to reach a stable active or standby state. ::= { ceRedunInternalStatesEntry 1 } SYNTAX CeRedunStateCategories MAX-ACCESS read-only STATUS current DESCRIPTION This places the specific internal state into one of several categories of internal states which are significant for redundancy. ::= { ceRedunInternalStatesEntry 2 } SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION This is a string description for the specific internal member state. ::= { ceRedunInternalStatesEntry 3 } -- Switchover Reason Description table SYNTAX SEQUENCE OF CeRedunSwitchoverReasonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table allows the managed system to report a read-only list of switchover reason indexes and the corresponding descriptions. If the ceRedunGroupDefinitionChanged object changes for a particular ceRedunGroupTypeIndex, then this table may have changed and should be read again. ::= { ceRedunGroup 4 } SYNTAX CeRedunSwitchoverReasonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A conceptual row in the ceRedunSwitchoverReasonTable. INDEX { ceRedunGroupTypeIndex, ceRedunSwitchoverReasonIndex } ::= { ceRedunSwitchoverReasonTable 1 } CeRedunSwitchoverReasonEntry ::= SEQUENCE { ceRedunSwitchoverReasonIndex Unsigned32, ceRedunReasonCategory CeRedunReasonCategories, ceRedunSwitchoverReasonDescr SnmpAdminString } SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION This is an index corresponding to a switchover reason code. ::= { ceRedunSwitchoverReasonEntry 1 } SYNTAX CeRedunReasonCategories MAX-ACCESS read-only STATUS current DESCRIPTION This categorizes the specific switchover reason into one of several categories. ::= { ceRedunSwitchoverReasonEntry 2 } SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION This is a string description for the specific switchover reason. ::= { ceRedunSwitchoverReasonEntry 3 } -- Redundancy Group Table SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION The value of sysUpTime corresponding to the last change for any object in the ceRedunGroupTable. The source of the change can be due to either an SNMP message affecting an object in the table or due to any other source of user input such as a command line interface. The timestamp applies to all read-create objects even for cases where the managed device only supports read-only access because it doesn't require user configuration of those objects. If there has been no change since the last time the sysUpTime was zero then report the sysUpTime as zero. ::= { ceRedunGroup 5 } SYNTAX SEQUENCE OF CeRedunGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table lists group configuration and status objects for a specific redundancy group. However, the members are configured separately in the ceRedunMbrTable. ::= { ceRedunGroup 6 } SYNTAX CeRedunGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A conceptual row in the ceRedunGroupTable.