Cisco DS0 Cross Connect Config Table

1.3.6.1.4.1.9.9.9999.1.1.1

This table is used to establish a DS0 cross connection. A DS0 cross connect is established by binding a unique DS0 group containing one or more DS0s of a single Ds1 interface to another unique DS0 group containing one or more DS0s of a single DS1 interface. ::= { cDs0CrossConnectConfig 1 } SYNTAX Cds0CrossConnectConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in cds0CrossConnectConfigTable table represents a DS0 cross connection. The two end point of the connection are: end point 1: cds0Endpt1Ds1 cds0Endpt1Ds0Group end point 2: cds0Endpt2Ds1 cds0Endpt2Ds0Group The end points of this connection should be entries of ccasGrpCfgTable and 'ccasGrpCfgServiceType' of of the entries should be 'tdmxconn'. The ccasGrpCfgTable is defined in CISCO-CAS-IF-MIB. INDEX {cds0Endpt1Ds1, cds0Endpt1Ds0Group } ::= { cds0CrossConnectConfigTable 1 } Cds0CrossConnectConfigEntry ::= SEQUENCE { cds0Endpt1Ds1 InterfaceIndex, cds0Endpt1Ds0Group Unsigned32, cds0Endpt2Ds1 InterfaceIndex, cds0Endpt2Ds0Group Unsigned32, cds0ConnRowStatus RowStatus } SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION The value of this object equals to the 'ifIndex' of a Ds1 interface. This Ds1 interface is used as the first end point of the Ds0 connection. ::= { cds0CrossConnectConfigEntry 1} SYNTAX Unsigned32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION The value of this object identifies a Ds0 group which contains one of more Ds0(s) within the Ds1 interface represented by 'cDs0Endpt1Ds1'. This Ds0 group is used as the first end point of the Ds0 connection. ::= { cds0CrossConnectConfigEntry 2 } SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION The value of this object equals to the 'ifIndex' of a Ds1 interface. This Ds1 interface is used as the second end point of the Ds0 connection. ::= { cds0CrossConnectConfigEntry 3} SYNTAX Unsigned32 (0..31) MAX-ACCESS read-create STATUS current DESCRIPTION The value of this object identifies a Ds0 group which contains one of more Ds0(s) within the Ds1 interface represented by 'cDs0Endpt2Ds1'. This Ds0 group is used as the second end point of the Ds0 connection. ::= { cds0CrossConnectConfigEntry 4 } SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION This object is used to create or delete an entry. The mandatory objects for creating an entry in this table: 'cds0Endpt2Ds1' 'cds0Endpt2Ds0Group' The following objects are not allowed to be modified after the entry to be added: 'cds0Endpt2Ds1' 'cds0Endpt2Ds0Group' ::= { cds0CrossConnectConfigEntry 5 } -- ********************************************************************* -- Conformance and compliance statements -- ********************************************************************* ciscoDs0CrossConnectMIBCompliances OBJECT IDENTIFIER ::= { ciscoDs0CrossConnectMIBConformance 1 } ciscoDs0CrossConnectMIBGroups OBJECT IDENTIFIER ::= { ciscoDs0CrossConnectMIBConformance 2} ciscoDs0CrossConnectMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION The compliance statement for Cisco agents which implement the CISCO-DSO-CROSS-CONNECT-MIB.