cdot11SecAuxSsidAuthKeyMgmt - Cisco Dot11 Security Auxiliary Service Set Identifier Authentication Key Mgmt

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cdot11SecAuxSsidAuthKeyMgmt

Cisco Dot11 Security Auxiliary Service Set Identifier Authentication Key Mgmt
1.3.6.1.4.1.9.9.413.1.1.1.1.11

This object specifies the type of key management employed for encryption keys defined for the VLAN in cdot11SecAuxSsidVlan. WPA key management('wpa') should only be selected when encryption is TKIP or AES-CCMP and authentication is open, i.e. dot11AuthenticationAlgorithmsIndex is openSystem(1), together either with EAP or WPA-PSK for this SSID. CCKM key management('cckm') can be used with encryption TKIP, WEP, CKIP, and Network-EAP authentication for this SSID. The value 'wpa1' should be selected only when encryption is TKIP. The value 'wpa2' should be selected only when encryption is either TKIP or AES-CCMP. If none of the bits are set, there is no run-time key management for this SSID.

Back to CISCO-DOT11-SSID-SECURITY-MIB MIB page.

IPHost Network monitor allows you to monitor cdot11SecAuxSsidAuthKeyMgmt on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of cdot11SecAuxSsidAuthKeyMgmt with IPHost tools

MIBs list