CISCO Express Forwarding Configuration Accounting Map

1.3.6.1.4.1.9.9.492.1.4.1.1.5

This object represents a bitmap of network accounting options. CEF network accounting is disabled by default. CEF network accounting can be enabled by selecting one or more of the following CEF accounting option for the value of this object. nonRecursive(0): enables accounting through nonrecursive prefixes. perPrefix(1): enables the collection of the numbers of pkts and bytes express forwarded to a destination (prefix) prefixLength(2): enables accounting through prefixlength. Once the accounting is enabled, the corresponding stats can be retrieved from the cefPrefixTable and cefStatsPrefixLenTable. ::= { cefCfgEntry 5 } SYNTAX INTEGER { none (1), -- Load sharing is disabled original (2), tunnel (3), universal(4) } MAX-ACCESS read-write STATUS current DESCRIPTION Indicates the CEF Load balancing algorithm. Setting this object to none(1) will disable the Load sharing for the specified entry. CEF load balancing can be enabled by setting this object to one of following Algorithms: original(2) : This algorithm is based on a source and destination hash tunnel(3) : This algorithm is used in tunnels environments or in environments where there are only a few source universal(4) : This algorithm uses a source and destination and ID hash If the value of this object is set to 'tunnel' or 'universal', then the FIXED ID for these algorithms may be specified by the managed object cefLoadSharingID. ::= { cefCfgEntry 6 } SYNTAX Unsigned32(0 | 1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION The Fixed ID associated with the managed object cefCfgLoadSharingAlgorithm. The hash of this object value may be used by the Load Sharing Algorithm. The value of this object is not relevant and will be set to zero if the value of managed object cefCfgLoadSharingAlgorithm is set to none(1) or original(2). The default value of this object is calculated by the device at the time of initialization.