caqSecurityRedirect2kPortList - Cisco Access Control List QoS Security Redirect2k Port List - CISCO-CATOS-ACL-QOS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

caqSecurityRedirect2kPortList

Cisco Access Control List QoS Security Redirect2k Port List
1.3.6.1.4.1.9.9.179.1.3.9.1.8

Indicates the set of physical port(s) that matched traffic is redirected to. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of redirect ports; the port is not included if its bit has a value of '0'. The value of this object is ignored whenever the value of caqSecurityAction object in the same row is not redirect(3). This object can accommodate up to 2048 ports. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493).

Back to CISCO-CATOS-ACL-QOS-MIB MIB page.

IPHost Network monitor allows you to monitor caqSecurityRedirect2kPortList on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco wireless switches right now.

MIBs list