caqMacPktClassifyVlansLow - Cisco Access Control List QoS Mac Packet Classify Vlans Low - CISCO-CATOS-ACL-QOS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

caqMacPktClassifyVlansLow

Cisco Access Control List QoS Mac Packet Classify Vlans Low
1.3.6.1.4.1.9.9.179.1.1.10

A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if Ethernet packet classify feature is enabled then the bit corresponding to that VLAN is set to '1'. Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.

Back to CISCO-CATOS-ACL-QOS-MIB MIB page.

IPHost Network monitor allows you to monitor caqMacPktClassifyVlansLow on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco optical switches right now.

MIBs list