ccasRSTRowStatus - Cisco CAS RST Row Status - CISCO-CAS-IF-EXT-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

ccasRSTRowStatus

Cisco CAS RST Row Status
1.3.6.1.4.1.9.9.314.1.5.2.1.13

This object is used for adding, deleting and modifying the entries from the ccasIfExtRegSignalTimerTable. A default entry with index value 1 is created at initialization, and it can not be modified or deleted. ::= { ccasIfExtRegSignalTimerEntry 13 } -- ********************************************************************* -- General Config Table -- ********************************************************************* SYNTAX SEQUENCE OF CcasIfExtGeneralConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table defines the general parameters related to CAS variant. ::= { ccasIfExtGeneralConfig 1 } SYNTAX CcasIfExtGeneralConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry represents a general attribute for CAS variant in media gateway. INDEX { cmgwIndex, ccasGCnfIndex } ::= { ccasIfExtGeneralConfigTable 1 } CcasIfExtGeneralConfigEntry::= SEQUENCE { ccasGCnfIndex Unsigned32, ccasGCnfGlarePolicy INTEGER, ccasGCnfParmSource INTEGER, ccasGCnfRegSigMode CASRegisterSignal, ccasGCnfLineSigType INTEGER, ccasGCnfRingBackType INTEGER, ccasGCnfIncCallHiFreqPower Integer32, ccasGCnfIncCallLoFreqPower Integer32, ccasGCnfIncCallNegTwist Integer32, ccasGCnfIncCallPosTwist Integer32, ccasGCnfIncCallBreakThreshold Integer32, ccasGCnfOutCallLoFreqPower Integer32, ccasGCnfOutCallPowerTwist Integer32, ccasGCnfOutCadenceOntime Unsigned32, ccasGCnfOutCadenceOfftime Unsigned32, ccasGCnfCountryCode SnmpAdminString, ccasGCnfEchoCancellation INTEGER, ccasGCnfSubscriberCategory INTEGER, ccasGCnfNatureOfCircuit INTEGER, ccasGCnfCompelledSignalingType INTEGER, ccasGCnfTxDigitOrder INTEGER, ccasGCnfDigitDetectMode INTEGER, ccasGCnfMeteringRepIntThresh Unsigned32, ccasGCnfStartTimer Unsigned32, ccasGCnfLongTimer Unsigned32, ccasGCnfShortTimer Unsigned32, ccasGCnfLongDurationTimer Unsigned32, ccasGCnfMGCTimer Unsigned32, ccasGCnfDigitType INTEGER, ccasGCnfEndPointDirectional INTEGER, ccasGCnfPulseReceiveTimeout Unsigned32, ccasGCnfInitialDelay Unsigned32, ccasGCnfMaxNumCallParty Unsigned32, ccasGCnfRowStatus RowStatus } SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION An arbitrary index that uniquely identifies a entry in the ccasIfExtGeneralConfigTable. The index of 1 is reserved for the default entry. ::= { ccasIfExtGeneralConfigEntry 1 } SYNTAX INTEGER { rptSzOnGlareTmrExp (1), rptSzOnGlareDet (2), rptRelOnGlareTmrExpAndGoOnHook (3), goOnHookOnGlareDet (4) } MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a glare policy. It is used only if CAS DS0 directionality of the endpoint is bidirectional, and is applicable for non R2 variants. . rptSzOnGlareTmrExp (1): When glare is detected, the GW will wait for the timeout value specified in the glare timer object or until incoming call attempt is removed by the other exchange/switch. If the far end does not back off due to wrong configuration, and the GW times out, it reports the seize event to the controlling application. . rptSzOnGlareDet (2): When glare is detected, the GW will signal the seizure event to the controlling application. . rptRelOnGlareTmrExpAndGoOnHook (3): When glare is detected, the GW will wait for the timeout value specified in the glare timer object OR until incoming call attempt is removed by the other exchange/switch. If the far end does not back off, due to wrong configuration, and the GW times out, it reports the release event and goes onhook, upon detection of on hook from the far end the GW will send the rlc event to the controlling application. . goOnHookOnGlareDet (4): When glare is detected, the GW will go on hook and let the far end switch continue. DEFVAL { rptSzOnGlareTmrExp } ::= { ccasIfExtGeneralConfigEntry 2 } SYNTAX INTEGER { casVariantFile (1), mib (2) } MAX-ACCESS read-create STATUS current DESCRIPTION This object indicates whether GW should read the CAS related timer parameters from the CAS Variant file downloaded for that endpoint or to read from the MIB. This gives the flexibility of configuring different CAS related timer values for different endpoints associated with the same CAS variant. DEFVAL { mib } ::= { ccasIfExtGeneralConfigEntry 3 } SYNTAX CASRegisterSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies the register signaling mode for a R2 registers. REFERENCE ITU-T recommendation Q.440 Interregister Signaling.

Back to CISCO-CAS-IF-EXT-MIB MIB page.

IPHost Network monitor allows you to monitor ccasRSTRowStatus on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

MIBs list