Cisco CAS Backward RS Previous Digit

1.3.6.1.4.1.9.9.314.1.4.1.1.6

This object specifies a backward signal requesting transmission of the previous ANI or DNIS digit (n - 1) after reception of digit n. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 6 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the incoming R2 register at the incoming end needs no additional address digit and is about to go over to transmission of a Group B signal conveying information about the condition of the equipment at the incoming exchange or the condition of the called subscribers line. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 7 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that: . Congestion of national links. . Congestion in selection stages of terminal international or national exchanges. . Occurrence of time-out or abnormal release of a System R2 register produced for any reason. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 8 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting for a calling party category information or a Group II signal. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 9 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the R2 register at the incoming end needs no additional digit, but will not send Group B signals. The call has to be charged on answer. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 10 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the sending of the ANI or DNIS digit (n - 2) after reception of digit n. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 11 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the sending of the ANI or DNIS digit (n - 3) after reception of digit n. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 12 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the country code indicator. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 13 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the language digit or the discriminating digit. . Operator assistance: requesting a language digit. . Automatic call: requesting a discriminating digit. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 14 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting information regarding the nature of the circuits involved in the connection so far, i.e. satellite link or not. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 15 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting information regarding the nature of echo suppressor being used in the connection. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 16 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating: . Congestion on international links. . Congestion in selection stages at an international transit exchange or at a terminal international exchange and/or its outgoing links. . Occurrence of time-out or abnormal release of a System R2 register produced for any reason. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.1 Backward signals. ::= { ccasIfExtRegisterSignalEntry 17 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting switch to reception of group C signals. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 18 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting resending of the last digit just sent out. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 19 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting for out pulsing of the called digits or DNIS from beginning. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 20 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that SIT tone should be played towards the calling party. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 21 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the line or lines connecting the called subscriber to the exchange are busy or engaged. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 22 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that congestion condition has occured after the changeover to Group B signals. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 23 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the dialed or called number is invalid or not in use (e.g. an unused country code, an unused trunk code or subscriber number that has not been allocated). The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 24 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the called party's line is free and that the call has to be charged on answer. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 25 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the called party line is free but is not to be charged on answer. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 26 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that the called party line is out of service or faulty. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.4.2 Backward signals. ::= { ccasIfExtRegisterSignalEntry 27 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that an announcement follows this indication. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 28 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the other exchange to switch to reception of group A and send the next DNIS digit. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 29 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the other exchange to switch to reception of group A and send the DNIS digits from the beginning. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 30 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the other exchange to switch to reception of group A and resend the last DNIS digit sent out. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 31 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal requesting the end receiving this signal to send the subscriber category information and switch to grp B from group C. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 32 } SYNTAX CASBackwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a backward signal indicating that congestion occurred in the network when in group C signaling state. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 33 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that ANI digits are available. This is used in country variants like India to indicate that the ANI digits are available when the backward signal requesting for ANI digits is received, before pulsing out the actual ANI digits. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 34 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that there are no ANI digits available for out pulsing. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 35 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that there are no more ANI digits to out pulse and the calling party can not be revealed to the called party. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 36 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that there are no more ANI digits to out pulse and the calling party can be revealed to the called party. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 37 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the end of DNIS digits. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 38 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that there is no calling party category (information) available to be sent out. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 39 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal. When it is used as the first forward signal and it indicates that: . A country code will follow on an international link. . The call requires echo suppressors. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 40 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal. When it is used as the first forward signal and it indicates that: . A country code will follow on an international link. . The call may not require any echo suppressor. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 41 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal. When it is used as the first forward signal and it indicates that: . A country code will follow on an international link. . The outgoing half echo suppressor has to be inserted. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 42 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that: . The outgoing half echo suppressor has been inserted. . The incoming half echo suppressor is required. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 43 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal. When it is used as the first forward signal and indicates that the call is being originated by test equipment. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 44 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that a satellite link is included in the connection. This signal is sent in response to backward signal requesting for nature of circuit. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 45 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that no satellite link is included in the connection. This signal is sent in response to backward signal requesting for nature of circuit. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 46 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the digit that separates or distinguishes different information blocks in the forward signals being generated or received. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 47 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the language to be used for an operator assisted call. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 48 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the language to be used for an operator assisted call. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 49 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the language to be used for an operator assisted call. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 50 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the receiving backward signal could not be processed or defined. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.1 Forward signals. ::= { ccasIfExtRegisterSignalEntry 51 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is set up from a subscriber's line and is non-priority. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 52 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is set up from a subscriber's line to which priority treatment of calls has been accorded. This signal is specified to national trunks only. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 53 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is set up from a subscriber's line to which priority treatment of calls has been accorded. This signal is specified to international trunks only. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 54 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call comes from maintenance equipment. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 55 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is setup from an operator. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 56 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is being used for national data transmission. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 57 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating that the call is being used for international data transmission. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 58 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the call is being set up from a subscriber's line, operator's position or from maintenance equipment and no forward transfer signal will be used. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 59 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the call is set up from an operator's position with possibility of recourse to the forward transfer facility. The default value is country specific. REFERENCE ITU-T Q440 - Specifications of signaling system R2 Interregister Signaling. Section 4.2.3.2 Forward signals. ::= { ccasIfExtRegisterSignalEntry 60 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the subscribers have a meter. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 61 } SYNTAX CASForwardSignal MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies a forward signal indicating the subscribers have an International Direct Dial facility. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 62 } SYNTAX INTEGER { firstANIDigit (1), aniAvailableOrNot (2), subscriberCategory (3) } MAX-ACCESS read-create STATUS current DESCRIPTION This object is used to interpret the meaning of the first ANI digit for both receiving and transmitting when sent and received. .firstANIDigit: First ANI digit. .aniAvailableOrNot: Indication as to whether ANI is available or not. .subscriberCategory: Subscriber category. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 63 } SYNTAX Unsigned32 (1..400) MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies the entry index from which values for the objects not specified in the set operation will be copied over from. If both the country index and this object are specified, this object takes precedence. If this object is not specified for an entry, it defaults to the entry index. ::= { ccasIfExtRegisterSignalEntry 64 } SYNTAX SnmpAdminString (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION This object determines the sequence in which information will be gathered by the incoming register. Only a set of predefined characters can be used in the octet string notation of the sequence. The special character and the alphabet strings allowed are listed below: '/' - Separator between different elements of information that should be collected. - Indicates how many digits of the following information element should be collected before switching to collecting the next information element. Number always precedes one of the information elements such as D or A. If no number is specified, all of the digits for that information element are collected before fetching digits for next info element. di - DNIS/Destination number/dialed number/called number. si - ANIS/Source number/calling number. sc - Subscriber Category. cc - Country Code. es - Echo Suppression Information. noc - Nature of Circuit. disc - Discriminator Digit. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 65 } SYNTAX INTEGER { dnisCCLangDisc (1), dnisLangDiscCC (2), cCLangDiscDnis (3), cCDnisLangDisc (4), langDiscCCDnis (5), langDiscDnisCC (6) } MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies the information element that will take precedence when being sent out as the first forward register signal for an outgoing call. This can be either the first DNIS digit, indication that country code follows or the language/discriminator digit. When all the above information is available at the GW, this object determines which one will be sent out first for each option, list is from most preferred to least preferred. .dniscclangdisc: First DNIS, country code indication, language/discriminator. .dnislangdisccc: First DNIS, language/discriminator, country code indication. .cclangdiscdnis: Country code indication, language/ discriminator, first DNIS. .ccdnislangdisc: Country code indication, first DNIS, language/discriminator. .langdiscccdnis: Language/discriminator, country code indication, first DNIS. .langdiscdniscc: Language/discriminator, first DNIS, country code indication. The default value is country specific. ::= { ccasIfExtRegisterSignalEntry 66 } SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION This object is used for adding, modifying, and deleting the entries from the ccasRegisterSignalTable. A default entry with index value 1 is created at initialization, and it cannot be modified or deleted. ::= { ccasIfExtRegisterSignalEntry 67 } -- ********************************************************************* -- Line Signal Timer Table -- ********************************************************************* SYNTAX SEQUENCE OF CcasIfExtLineSignalTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table defines all timers related to the CAS Line signals.