CISCO-CALL-RESOURCE-POOL-MIB - ccrpCPActiveOverflowSessions

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

ccrpCPActiveOverflowSessions

Call Resource Pool CP Active Overflow Sessions
1.3.6.1.4.1.9.9.124.1.2.1.1.1.2

Number of active sessions which are overflow sessions for this customer profile. Overflow sessions are those calls which arrived and were accepted when the customer profile's ccrpCPActiveSessions >= ccrpCPSessionLimit. ::= { ccrpCPStatisticsEntry 2 } SYNTAX Counter32 UNITS "sessions Total number of sessions for this customer profile since last system re-initialization. Includes non-overflow and overflow sessions. Includes all calls which were answered, including those which may have been terminated due to post-answer resource restrictions or authorization failures. ::= { ccrpCPStatisticsEntry 3 } SYNTAX Counter32 UNITS "sessions Total number of overflow sessions for this customer profile since last system re-initialization. Includes all calls which were answered and identified as overflow sessions, including those which may have been terminated due to post-answer resource limits or authorization failures. ::= { ccrpCPStatisticsEntry 4 } SYNTAX Counter32 UNITS "occurrences Number of times this customer profile has been in an overflow state since last system re-initialization. The customer profile is in overflow state when ccrpCPActiveSessions > ccrpCPSessionLimit. If overflow is not allowed for this profile, this value is always zero. ::= { ccrpCPStatisticsEntry 5 } SYNTAX Counter32 UNITS "occurrences Number of times this customer profile has reached its maximum allowed active sessions, including overflow sessions since last system re-initialization. The customer profile is in maximum state under the following conditions: Overflow allowed and limited ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize. Overflow not allowed ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, but not limited by ccrpCPOverflow, this value will always be zero. ::= { ccrpCPStatisticsEntry 6 } SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION The amount of time that this customer profile has been in overflow state since last system re-initialization. The customer profile is in overflow state when ccrpCPActiveSessions > ccrpCPSessionLimit. ::= { ccrpCPStatisticsEntry 7 } SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION The amount of time that this customer profile has reached its maximum allowed active sessions since last system re- initialization. The customer profile is in maximum state under the following conditions: Overflow allowed and limited ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize. Overflow not allowed ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, but not limited by ccrpCPOverflow, this value will always be zero. ::= { ccrpCPStatisticsEntry 8 } SYNTAX Gauge32 UNITS "sessions The maximum number of active sessions which has occurred for this customer profile since last system re-initialization. This is the maximum value of ccrpCPActiveSessions since last system re-initialization. This includes non-overflow and overflow sessions. The peak value for the overflow sessions may be computed by subtracting the value of ccrpCPSessionLimit from this value. ::= { ccrpCPStatisticsEntry 9 } SYNTAX Counter32 UNITS "call attempts Number of calls rejected due to exceeding allowed simultaneous sessions for this customer profile since last system re-initialization. If overflow is not allowed for this profile, this counts the number of times calls arrived when ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, this counts the number of time calls arrived when ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflow. If overflow is allowed, but not limited by ccrpCPOverflow, this value is always zero. Includes calls which were answered, then terminated due to post-answer session counting restrictions for the customer profile. Does not include calls terminated due to post-answer resource limits or post-answer authorization failures beyond customer profile authorizations. ::= { ccrpCPStatisticsEntry 10 } SYNTAX Counter32 UNITS "call attempts Number of calls rejected due to unavailable resources for this customer profile since last system re-initialization. Includes calls which were answered then terminated due to post-answer resource restrictions. ::= { ccrpCPStatisticsEntry 11 } -- DNIS Session Statistics SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION The limit on the number of entries that the ccrpDnisStatisticsTable may contain. When this table is full, any new DNIS values will be ignored. A value of 0 will prevent any DNIS statistics from being retained. If this value is set to 0 after entries already exist in the table, those entries will be deleted. Reducing the value will truncate the table based on the sort order of the index. The range for this value is from 0 to a system specific number specified by ccrpDnisStatisticsTableSystemMax. DEFVAL { 0 } ::= { ccrpDnisStatistics 1 } SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION The system specific limit on the number of entries that the ccrpDnisStatisticsTable may contain. This is the maximum value that will be accepted for ccrpDnisStatisticsTableMaxEntries. ::= { ccrpDnisStatistics 2 } SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION The number of times a new DNIS has been ignored due to the ccrpDnisStatisticsTableMaxLength having been reached since last system re-initialization. When the table is full, this counter is incremented both for each new DNIS arriving, as well as every time the same DNIS arrives. ::= { ccrpDnisStatistics 3 } SYNTAX SEQUENCE OF CcrpDnisStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Table of session counts for individual DNIS numbers. The information provided in this table may be used to better understand usage of network resources and improve capacity planning. ::= { ccrpDnisStatistics 4 } SYNTAX CcrpDnisStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the table, containing session counts for a single DNIS number. The DNIS does not need to be a member of a DNIS group or be associated with a customer profile to appear in this table. Entries are created as a result of a call being received by the system with the DNIS number. INDEX { IMPLIED ccrpDnisStatisticsDnisNumber } ::= { ccrpDnisStatisticsTable 1 } CcrpDnisStatisticsEntry ::= SEQUENCE { ccrpDnisStatisticsDnisNumber CcrpPhoneNumber, ccrpDnisStatisticsGroupName SnmpAdminString, ccrpDnisActiveSessions Gauge32, ccrpDnisTotalSessions Counter32, ccrpDnisPeakActiveSessions Gauge32, ccrpDnisCallTypeRejected Counter32 } SYNTAX CcrpPhoneNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION DNIS associated with call

Back to CISCO-CALL-RESOURCE-POOL-MIB MIB page.

IPHost Network monitor allows you to monitor ccrpCPActiveOverflowSessions on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

MIBs list