ccsFlapPowerAdjustments - Cisco Cable Spectrum Flap Power Adjustments - CISCO-CABLE-SPECTRUM-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

ccsFlapPowerAdjustments

Cisco Cable Spectrum Flap Power Adjustments
1.3.6.1.4.1.9.9.114.1.1.5.1.8

The number of times the Cable Modem upstream transmit power is adjusted during station maintenance. When the adjustment is greater than the power adjustment threshold the counter will be incremented. The power adjustment threshold is chosen in an implementation-dependent manner. The Flap Count (ccsFlapTotal) will be incremented when this counter is incremented. If ccsFlapTotal is high, ccsFlapPowerAdjustments is high but the Hits and Misses are low and ccsFlapInsertionFails are low then the flapping is probably caused by an improper transmit power level setting at the modem end. This count can indicate: Amplifier degradation, Poor connections, or Wind, moisture, or temperature sensitivity. Discontinuites in the value of this counter can occur if this entry is removed from the table and then re-added, and are indicated by a change in the value of ccsFlapCreateTime.

Back to CISCO-CABLE-SPECTRUM-MIB MIB page.

IPHost Network monitor allows you to monitor ccsFlapPowerAdjustments on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

MIBs list